SMA SB3000TL-US-22, Сборка

Страница: 13 / 56

6 Replacing the Communication Assembly SMA Solar Technology AG
Replacement Manual 13 CH-SBCOM31BG2-SBxx000TL-US-22-RM-xx-10
3. Release the screw of the communication assembly.
4. Remove the defective communication assembly:
• Press the right-hand retainer outwards until it releases.
• Pull the communication assembly forwards out of the right-hand retainer.
• Pull the communication assembly out of the left-hand retainer.
Installing the new communication assembly
1. Install the new communication assembly:
• Insert the communication assembly into the left-hand retainer.
• Push the right-hand retainer outwards and insert the
communication assembly into the right-hand retainer.
• Push the communication assembly into both retainers until it
snaps into place.
2. Fold the communication assembly downwards. Ensure that the
ribbon cable is not clamped by the communication assembly or
when closing the lower enclosure lid.
3. Tighten the screw of the communication assembly.
ENGLISH