SCR-15sm
1c.
Reinstall screws fastening HF Unit to LF Unit
STEP 2 - CONNECT LF UNIT
3a.
Connect loudspeaker wires from amplifier LF channel output to either binding post pair on
the LF unit. Be sure to observe correct polarity.
Connect To Woofer (LF) Amplifier Channel Negative Output
Connect To Woofer (LF) Amplifier Channel Positive Output
LF
Note: The two pairs of binding posts
on the LF unit are wired together inside
the loudspeaker, therefore, either set
may be used, or you may use all four
to increase current capability by using
four wires from your amplifer. If you
use four, connect the two negative
wires together and the two positive
wires together at the amplifier end and
then to the corresponding amplifier
output terminal.
CAUTION: DO NOT CONNECT NEGA-
TIVE AND POSITIVE WIRES TOGETHER.
AMPLIFIER DAMAGE WILL RESULT.
