4
Table of Contents
TABLE OF CONTENTS
1. INTRODUCTION
2. THE DESIGN CONCEPT
2.1 High quality components and design
2.2 Inputs and outputs
3. INSTALLATION
3.1 Rack mounting
3.2 Mains voltage
4. REAR PANEL CONNECTIONS
4.1 GND - Ground pin connector
4.2 Ground Lift Switch
4.3 L&R Stereo Unbalanced & Balanced Audio Outputs
4.4 L&R Stereo RCA Record Input and outputs
5. FRONT PANEL CONNECTIONS & CONTROL KNOBS/SWITCHES
5.1 XLR Mic Input controls ~ Independent (2 x) rotary gain controls, switchable Phantom power,
peak lights, and a record/monitor enable switch
5.2 Stereo line Input controls ~ Independent (2 x) rotary volume controls, -20dB pad, and a
record/monitor enable switch
5.3 Phono Input controls ~ Independent (2 x) rotary volume controls, line/phono switch, and a
record/monitor enable switch
5.4 Stereo headphone amplifiers ~ Independent (2 x) rotary monitor volume controls
5.5 Master volume section
5.6 Power switch ~ Power on/off switch
6. APPLICATION GUIDE
6.1 The Purpose of the SM IN5
6.2 The SM IN5 as a recording interface unit
6.3 The SM IN5 as a standard mixer
6.4 The SM IN5 as a converter for digital recorders (with optional USBMOD digital module)
7. FUTURE POSSIBLE OPTIONS
7.1 Information about the USBMOD S/PDIF Option board
8. SPECIFICATIONS
9. WARRANTY
