www.smproaudio.com
7
3.4 Audio Connections
Analog Inputs – Combo connector inputs
2 x combo (XLR & TRS) connectors are provided as channel inputs. Connect the source audio
material you would like to pre-amplify and/or convert to a digital stream to these connections.
The XLR inputs are designed to accept microphone signals whilst the multi-purpose combo socket
accepts 1/4” jack inputs from line level devices such as synthesizers, mixer outputs, or other
devices.
Analog outputs – XLR & TRS connector outputs
2 x XLR and 2 x TRS connectors
are provided on the rear panel as a
stereo channel output pair.
These two analog output pairs
deliver the left and right channels
of the signal that is inserted into
either the digital or analog inputs
of the ADDA 192-S.
Connect the outputs of the ADDA
192-S to your destination audio device.
*Note: The analog output pair delivers a mixed signal of both the digital and analog input signals
of the ADDA 192-S. You can adjust the balance of signals via the Analog and Digital Mix rotary
knobs located on the front panel. This is perfect for attaining a mix balance of incoming signals.
Headphone output –
” TRS stereo connector output
1 x Stereo TRS connector is provided as a headphone amplifier output monitor.
Simply connect the
” jack from your headphones and adjust the headphone gain
control to your desired listening level.
*Note: The stereo headphone output delivers the same signal as the analog
output pair. As such, keep in mind that the Analog and Digital Mix rotary knobs
located on the front panel effect the balance of the monitored mix.
