SLX SLx distribution amplifier Скачать руководство пользователя страница 3

Satellite 

Downlead

Satellite 

Receiver

UHF

Aerial

Aerial 

Flylead

Aerial Flylead

From RF2 Out

Main TV

SCART/HDMI 

Connection or  

          Aerial Flylead

               from RF1 Out

Link

Link

Aerial 

Flylead

Link

Aerial 

Downlead

1.   Connect your UHF aerial downlead to the 

ANTENNA IN

 (

ANT IN, UHF IN

) input on your 

Satellite receiver.

2.  Connect your satellite receiver to your main  

  TV with an HDMI lead (if possible) or Scart  

  lead or an aerial flylead from the RF1 output. 

  (if you wish to watch Freeview™ on this  

  TV connect via a Freeview™ receiver unless  

  a receiver is already built in to your TV).
3.  Connect the 

RF2 OUT

 on the satellite receiver  

  to the 

RF IN 

socket on your SLx Amplifier.

4.  For TVs situated in remote rooms connect the  

  cable running to the remote coax outlet to any  

  of the TV signal outputs 1, 2, 3, 4 on your  

  SLx Amplifier.
5.  Connect one end of a TV aerial flylead to the 

   surface socket in the remote room and connect  

  this via one of the SLx links supplied to the  

  ANT IN socket on your TV (the SLx link allows 

  you to control the Sky™ box in the  

  main room).
6.  For older TVs a separate Freeview™ set top  

  or plug in receiver will be required.  This  

  should be connected between the SLx link 

  and the 

ANTENNA IN

 (

ANT IN, UHF IN

) coax  

  socket on your TV.

Satellite  and TV Distribution 

If a DVR or VCR is wanted in the main room,  

connect your UHF aerial downlead to the 

ANTENNA IN

 (

ANT IN, UHF IN

) input on your DVR/

VCR. Connect the DVR/VCR 

RF OUT

 to  

the satellite receiver 

ANTENNA IN

 using an  

aerial flylead then connect the DVR/VCR  

Scart/HDMI out to the satellite receiver  

Scart/HDMI in.
If a DVR or VCR is wanted in remote rooms,  

it should be connected between the SLx link  

and the TV.
If a separate Freeview™ set top box is present  

the DVR/VCR should be connected between  

the Freeview™ box and the TV.

Satellite  and TV Distribution  

plus optional VCR or  

DVR connection

Satellite 

Receiver

SCART/HDMI

Connection

UHF

Aerial

DVR/VCR

Aerial 

Flylead

Main TV

SCART/HDMI 

Connection or  

          Aerial Flylead

               from RF1 Out

Link

Link

Aerial 

Flylead

Link

Satellite 

Downlead

Aerial 

Downlead

Freeview™ 

Receiver

Freeview™ 

Receiver

Содержание SLx distribution amplifier

Страница 1: ... existing TV aerial socket and close to your Sky box Alternatively it may be easier to run cable to your other rooms from the loft or some other location In choosing a location consider the following a The amplifier needs to be plugged into the mains so it must be near a socket b You will need to run cables from the amplifier to each outlet point and to minimise signal loss cable runs should be ke...

Страница 2: ...n in Fig 3 Tighten all screws and trim away any loose strands of braid 1 2 3 4 5 1 2 3 Wiring coax plugs and coax surface outlets Satellite Receiver Sky Sky SkyHD Aerial Flylead Aerial Flylead From RF2 Out Main TV SCART HDMI Connection or Aerial Flylead from RF1 Out Link Link Aerial Flylead Link Satellite Downlead 1 Connect your satellite receiver to your main TV with an HDMI lead if possible or S...

Страница 3: ...lied to the ANT IN socket on your TV the SLx link allows you to control the Sky box in the main room 6 For older TVs a separate Freeview set top or plug in receiver will be required This should be connected between the SLx link and the ANTENNA IN ANT IN UHF IN coax socket on your TV Satellite and TV Distribution If a DVR or VCR is wanted in the main room connect your UHF aerial downlead to the ANT...

Страница 4: ...autions given in the installation section of these instructions must be observed to prevent overheating In addition the amplifier should not be fixed where it is likely to become smothered by curtains or other fabrics etc or other thermal insulation materials in a roof space or similar building void The unit should not be left resting on a carpet Cable Installation Do not install cable Closer than...

Отзывы: