Standard:
EN 303 354
Product Type:
D Signal Distribution Amplifier
Filter Class:
3 Mitigates 4G interference
Suitable for digital TV signal distribution
Ch21-59 in the UK and EIRE.
Troubleshooting
If you experience reception problems after
installing your SLx booster, please see below:
No picture or sound
Is the signal reaching your TV? Check:
- Everything, including the booster is plugged
in and switched on
- Coaxial connections are correctly made
(no braid or foil is touching the inner core
Picture or sound breaking up
- Use the best wideband aerial ideally fitted
outdoors
- Use good quality coax cable, poorly
screened cable can pick up noise
- Adjust the gain control up or down, either
too much or too little signal can cause
similar break-up
For specific help with digital TV reception
problems, visit
www.digitaluk.co.uk
or
www.bbc.co.uk/reception/television/
freeview/reception_problems
Wall Mounting Drilling Template
Technical Support
If you experience problems setting up your
aerial, please visit our technical website at
www.slxtechnology.com/support
you can
send us a message or
live chat
during office
hours.
Waste electrical and electronic
products should not be disposed of
with household waste. Please recycle
where facilities exist. Check with your
Local Authority for recycling advice.
© Philex Electronic Ltd. 2017. v1 MK42 0NX
Support: www.slxtechnology.com/support
4
SLx1 and SLx2
Prepare holes with centres 50mm
apart for wall mounting
Declaration of Conformity
Hereby, Philex declares that these boosters/
amplifiers for TV broadcast reception in
domestic premises are in compliance with the
Radio Equipment Directive 2014/53/EU.
The full Declaration of Conformity is available
by contacting the following internet address:
www.slxtechnology.com/DoC
COMPLIANT
