2
1 - INSTALLATION TO DECK
Remove nut, faucet retainer and gasket.
Install faucet into the center hole in deck or lavatory – 1-3/16”
(30 mm) minimum hole required.
NOTE:
If installing the faucet on a three (3) hole sink, a trim plate
should be installed at this time.
B
A
1
IMPORTANT: FLUSH DIRT, DEBRIS, AND SEDIMENT FROM SUPPLY LINE(S)
BEFORE CONNECTING FLEx HOSE(S).
FAUCET ROUGH-IN
Model EAF-700/750
1.5 gpm (5.7 Lpm) Max. Flow†
Faucets with Hot/Cold Water Supply
Model EAF-700/750
1.5 gpm (5.7 Lpm) Max. Flow†
Faucets with Tempered Water Supply
24°
5-7/8”
(147 mm)
SPOUT
O-RING
MIXING LEVER
(CAN BE SET AND
REMOVED)
1-3/16” (30 mm)
MIN. DIA. HOLE
REQUIRED
1-1/2” (38 mm)
MAX. DECK
THICKNESS
NUT
RETAINER
GASKET
HOT
SUPPLY
COLD
SUPPLY
13” (330 mm)
LONG FLEX HOSE
2-1/4”
(57 mm)
2-9/16”
(65 mm)
TEMPERED
SUPPLY
SPOUT
O-RING
1-3/16” (30 mm)
MIN. DIA. HOLE
REQUIRED
1-1/2” (38 mm)
MAX. DECK
THICKNESS
NUT
RETAINER
GASKET
13” (330 mm)
LONG FLEX HOSE
5-11/32”
(151 mm)
3-15/16”
(100 mm)
10-1/32”
(255 mm)
24°
5-7/8”
(147 mm)
SPOUT
O-RING
MIXING LEVER
(CAN BE SET AND
REMOVED)
1-3/16” (30 mm)
MIN. DIA. HOLE
REQUIRED
1-1/2” (38 mm)
MAX. DECK
THICKNESS
NUT
RETAINER
GASKET
HOT
SUPPLY
COLD
SUPPLY
13” (330 mm)
LONG FLEX HOSE
2-1/4”
(57 mm)
2-9/16”
(65 mm)
TEMPERED
SUPPLY
SPOUT
O-RING
1-3/16” (30 mm)
MIN. DIA. HOLE
REQUIRED
1-1/2” (38 mm)
MAX. DECK
THICKNESS
NUT
RETAINER
GASKET
13” (330 mm)
LONG FLEX HOSE
5-11/32”
(151 mm)
3-15/16”
(100 mm)
10-1/32”
(255 mm)
24°
5-7/8”
(147 mm)
SPOUT
O-RING
MIXING LEVER
(CAN BE SET AND
REMOVED)
1-3/16” (30 mm)
MIN. DIA. HOLE
REQUIRED
1-1/2” (38 mm)
MAX. DECK
THICKNESS
NUT
RETAINER
GASKET
HOT
SUPPLY
COLD
SUPPLY
13” (330 mm)
LONG FLEX HOSE
2-1/4”
(57 mm)
2-9/16”
(65 mm)
TEMPERED
SUPPLY
SPOUT
O-RING
1-3/16” (30 mm)
MIN. DIA. HOLE
REQUIRED
1-1/2” (38 mm)
MAX. DECK
THICKNESS
NUT
RETAINER
GASKET
13” (330 mm)
LONG FLEX HOSE
5-11/32”
(151 mm)
3-15/16”
(100 mm)
10-1/32”
(255 mm)
If a connection to separate
hot and cold water supplies
is desired, then a Bak-Chek
®
tee fitting (not supplied) must
be used prior to connecting
to the faucet.
When the EAF faucet is installed on a sink that has three
(3) hole punchings, a trim plate should be used.
Trim plate
must be specified and ordered separately:
ETF-312-A
Trim Plate for 4” (102 mm) Centerset Sink
ETF-510-A
Trim Plate for 8” (204 mm) Centerset Sink
† EAF Faucets are furnished with a 1.5 gpm (3.8 Lpm) spray head).
