Slinger Slingshot T-One Launcher, Руководство пользователя

Страница: 19 / 34

18
Slinger Launcher User Guide
8/21
SLINGER LAUNCHER CONTROLS
1. POWER : The power switch turns the Launcher to
“ON”.
USER NOTE: The Remote Control DOES NOT turn the Launcher power On or OFF .
The Remote Control only operates AFTER the Power Switch on the control panel has
been switched to
‘ON’.
USER NOTE: Please note that if the ON / OFF switch is switched on then off in rapid
succession there is a risk of causing damage to the electronic control panel.
2.
CHARGER : The battery charger plugs into the charger socket on the front control panel. The
recommended charging time for a fully drained battery is a maximum of 5 hours.
USER NOTE: Please ensure that the charger plug is fully inserted into the charger socket.
There is a
“click” felt when the charger plug is correctly inserted into the charger socket.
3.
BATTERY INDICATOR LIGHTS
: The battery is fully charged when all 4 LED
lights are
showing RED, YELLOW, GREEN, GREEN.
USER NOTE: During use, the Launcher LED lights will blink continuously. The LED lights will
go out as power is drained from the battery. Each GREEN or YELLOW light represents about
one-third (1/3) of the total battery life. When only the RED LED is showing then the Launcher
will soon be out of power.
4.
REMOTE CONTROL RESET
: For resetting or replacing the remote control - see
“remote
control
instructions” on page 17.
5.
GUARD BARS
: These provide protection for the control panel avoiding potential damage if hit
by returning balls.
USER NOTE: We recommend that these are not removed. Change to: Removing these bars
will invalidate the warranty on the T-One Launcher.
6.
BALL SPEED DIAL
: Controls the speed of the balls being fired. The launcher speed
ranges from the Ball Boy lowest speed of 10mph/16kmph to an advanced player
speed of 45mph / 73kmph with the ball firing with a tournament level of topspin.