Slinex Unique Direct Series Скачать руководство пользователя страница 6

Страница: 6 / 8

{ Design. Uniqueness. Innovation }

5.2 Door panel and camera image view

Standby mode

Monitor will display

the image from the

first door panel

(monitoring time – 60 seconds)

Monitor will display

the image from the

second door panel

(monitoring time – 60 seconds)

Press «Monitor»
button on the
monitor

20 seconds

Standby mode

Press «Monitor»
button on the
monitor again

Monitor will display

the image from the

first CCTV camera

(monitoring time is unlimited)

Monitor will display

the image from the

second CCTV camera

(monitoring time is unlimited)

Press «Hang up» button to
stop monitoring or
conversation

Press «Answer» button to start
conversation with the visitor

Press «Unlock» button to open
lock connected to the current
door panel, relay built into the
panel will open the lock

UNIQUE

DIRECT

SERIES

5.3 Incoming call redirection

Two monitors connected into one system are used.

Notes:

1) If only one door panel connected to the monitor then you can escape monitoring mode by pressing
«Monitor»

button one more time. (all other sources of video signal should be disabled in the monitor

settings).
2) If several monitors connected into one system, the user can view the image from door panels and
cameras on any monitor inside this system. The image will be transferred from the «Master» monitor door
panels and cameras to the «Slave» monitors.
3) If someone press call button on the door panel while monitoring is active then the image from this door
panel appears on the monitor screen and call melody starts. Press «Answer»

button to start

conversation.

Note:

If incoming call was successfully redirected to the other monitor then current monitor will enter standby
mode.

Melody starts ringing on
the other monitor inside

the system and visitor image

appears on the monitor screen

Conversation with the

visitor on the other

monitor begins

Incoming call from the

door panel and the