Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
{ Design. Uniqueness. Innovation }
DESIGN
DIRECT
SERIES
7
8
Diagram 2. SL-07M system connection.
SL-07M (Master)
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
SL-07M (Slave)
Notes:
* Use «Power» plug on the monitor to connect external power 13,5 V. While use external power
supply please keep main power cord ~100-240 V disconnected from the outlet, otherwise it can damage
monitor circuits.
** Door panels, cameras, power supplys, locks and motion sensors described on the schemes are optional
devices and aren’t included into monitors kit.
Audio
GND
Data
Video
Audio
GND
Data
Video
Audio
GND
Data
Video
Audio
GND
Data
Video
Audio
GND
Da
ta
Video
SL-07M (Slave)
SL-07M (Slave)
4.3 Unit mount
1) Take the surface mount bracket from the kit and situate it 150-160 cm from the floor line.
2) Mark and drill four halls in the wall.
3) Take four nuts from the kit and hammer them into the drilled halls.
4) Fix surface mount bracket on the wall by four screws from the kit.
5) Connect all communication wires and fix the monitor on the surface mount bracket.
