{ Design. Uniqueness. Innovations }
1
Rev. 1.0
2
Attention
!
As a result of continuous upgrades and functionality improvements, technical character-
istics of the device can be changed without any preliminary declaration.
This manual can contain some inaccuracy or misprint. The owner reserves the right to
make corrections to the information described in the user manual and device package.
The last revision of this manual is available on www.slinex.com
Safety instructions
Please read and keep that manual.
The device installation process should be carried out by the qualified specialists.
Use the device from the –40 ˚C to +65 ˚C (–40 ˚F to 149 ˚F), always keep it within that temperature range.
Installation surface should be free from vibration and impact influence.
Keep this device far from open sources of heat, such as radiators, heaters, and ovens.
The device can be installed near other electronic equipment in case if the temperature of the environment
does not exceed previously mentioned range.
The device should be protected from the direct influence of the natural phenomena, such as direct sunlight,
rain or snow.
Don’t use aggressive or abradant detergent for the device surface cleaning.
Use soft wet cloth or tissues to remove strong dirt.
Nature protection
Don’t throw away the device with other industrial or nutritive trash if you see that
symbol. Some regions have separation and recycling systems for the electronic
equipment. Connect with local authorities to receive information about recycling of
electronic equipment for your region.
Rights and limitation of liability
All rights reserved. Any part of that document can not be published in any form, translated into other
languages or reproduced in any way including electronic or mechanical.
Document recording and copying are strictly forbidden without owner permission.
Table of contents
1. Package ............................................................................................................................................................................................3
2. Specification ...................................................................................................................................................................................3
3. Description......................................................................................................................................................................................4
4. Installation.......................................................................................................................................................................................5
5. Connectors......................................................................................................................................................................................5
6. Schematic diagrams ....................................................................................................................................................................6
7. ID card reader settings................................................................................................................................................................8
8. Sound and visual indication .................................................................................................................................................. 10
9. Unlock time setting.................................................................................................................................................................. .10
10. Name plates .............................................................................................................................................................................. 11
11. Limited Warranty..................................................................................................................................................................... 12
!
SERIES
ACCESSORIES
