TROUBLESHOOTING
Inflator fails to operate when plugged in:
1. The fuse, located in the plug adapter, may have blown.
2. Unscrew the tip of the plug adapter, remove fuse and
inspect. If necessary, replace fuse with one of the same
amperage.
3. You may need to be in “accessory” or “on” position.
Please make sure emergency brake is set and car is in
park. Always ensure air hose chuck touches the core of the valve stem for proper inflation.
Inflator does not start:
1. Push the power plug firmly into the receptacle and twist it back and forth.
2. Check receptacle and plug terminals for dirt, particularly tobacco (use a non-conductive probe,
not fingers or metal).
3. Check vehicle power outlet fuse; it should be a minimum of 15 amps.
Inflator runs but does not inflate:
1. Be sure the connector is tightly screwed on the valve stem as far as possible.
2. Check tire for leaks and check hose for breaks and leaks at fittings.
Inflator runs slowly:
1. Unit may have overheated from excessive use. Shut it off and allow unit to cool for 25 minutes.
2. Voltage may be too low. Check condition of battery.
NOTE:
If tire is totally deflated, it is possible that the tire could separate from the rim allowing air to
leak out when trying to inflate. In the event this occurs, it may be necessary to jack up the tire prior
to inflation. Inflator and hose included for tire inflation only.
Check your tire warranty prior to installation of this product.
CAUTION:
Inspect tire to confirm there is no sidewall or major tire damage. Slime tire sealant will
not repair major tire damage, sidewall punctures or punctures greater than 1/4
”
(6mm). Puncturing
objects should be removed prior to using Slime. Keep inflator out of reach of children. Always use a
tire gauge to check tire pressure. Do not overinflate tire.
On our website you can
discover more about automotive tools.
Содержание 50063
Страница 3: ......
