5 of 6
P
ANDORA
/R
HAPSODY
C
ONFIGURATION
To setup Pandora or Rhapsody Internet Radio, you must first configure a Squeezebox account at
http://mysqueezebox.com
(formerly
http://squeezenetwork.com
) and associate the Pandora and/or
Rhapsody service with the account. Rhapsody is a paid service, and may use existing credentials or
requires the creation of a new account. Pandora is a free service. See Logitech for full details.
1. To use Rhapsody or Pandora with your Squeezebox, you must first create an account and
register your squeezebox.
a. Cycle power to squeezebox and press right arrow to access the menu
b. Use the arrows to Select Step 3 Connect to squeezenetwork (mysqueezebox.com)
c. Select Create an account or Login to existing account
i. Use digits to enter email and password
ii. Use zero for @ and Dot (.)
2. Add Rhapsody to account
a. Open a browser on your computer and open
www.mysqueezebox.com
. Follow the links
on mysqueezebox.com to subscribe to Rhapsody, or paste in existing credentials.
b. Select and Note a email and password for the Rhapsody account as these will need to
be entered into the Rhapsody APP on mysqueezebox.com
3. Add Rhapsody App to mysqueezebox.com
a. Click App Gallery and select Rhapsody
b. Click install App
c. Enter email and password for the Rhapsody account
4. Repeat steps 2&3 above for Pandora (if desired) to create an account and add the Pandora App.
5. Test Rhapsody on squeezebox
a. Cycle power to squeezebox and press the left arrow to access the menu
b. Select connect to mysqueezebox.com
c. Follow the menu to select and play a Rhapsody selection
d. If a firmware update is required, perform the update.
e. Verify music plays
6. Point the Squeezebox back at the
g!
system controller.
a. Cycle power to the Squeezebox and press the arrow to access the menu.
b. Use the arrows to Select Step 3 Connect to the
g!
system controller.
7. Configure and test Rhapsody/Pandora music service in
g!
.
a. Enter email and password
for mysqueezebox.com
as the login credential
b. Cycle power to squeezebox and test control from
g!
interface.
