SLIDEWHIZZER SWSL-03, Руководство по сборке

Страница: 20 / 20

CARE & MAINTENANCE
To clean the slide, simply wipe with a damp cloth.
Regularly check to see if slide chute, steel tubes, steps, ground anchors and other parts are tightened and
completely secure.
Replace worn and damaged parts when if found and if necessary, refrain from use until replacement parts
can be obtained.
If the paint is chipped, we recommend you lightly rub the damaged area and cover using a non-toxic
enamel paint.
IMPORTANT: While no regular maintenance is required, you must inspect the slide before each use and
replace any worn, defective, or missing parts. The following conditions could represent potential hazards:
missing, improperly positioned, or insecurely attached ground anchors or slide chute, missing, improperly
secured or damaged ladder steps, a bent or broken frame, and/ or bent or buckled Stabilizer or Tie Bars.
Stop using slide immediately and guard against unauthorized use until slide is properly repaired.
FREQUENTLY ASKED QUESTIONS
Question: “How should I clean my slide?”
Answer: You should clean the slide with a solution of warm water and non- corrosive/abrasive soap.
Dampen rag with this solution and wipe completely dry before using
Question: “Is there any maintenance I need to do for my slide?”
Answer: You should always double check to make sure all your bolts are tight and secure, and that the
ground anchors are present and securely in place before use.
Question: “Something was missing from the packaging,” “I need to purchase a replacement part”or
“I discovered a damaged piece. What should I do?”
Answer: Contact Platports®. You must have proof of purchase and/or order confirmation
available to be considered for warranty replacement. You must report missing pieces
within 30 Days from date of purchase.
Question: “A step seems loose, what should I do?”
Answer: Make sure the bolts under the plastic steps are secure.
page 20 of 20