SLIDEWHIZZER SW-04, Руководство по сборке

Страница: 8 / 11

5 - 1. Connect the ladder stabilizer bar (I) together
5 - 2. Insert the plastic cap (R) to the both sides of the ladder stabilizer bar (I).
5 - 3. Fasten the bottom handrail tube (L - b) to the ladder stabilizer bar (I)
by using bolt (B) x 1 + washer (D) x 1+ spring washer (E) x 1
and domenut (F) x 1. (Figure 1)
5 - 4. Fasten the ladder step (H) to the bottom handrail tube (L - b) by using bolt (B) x 1 +
square washer (U) x 1. (Figure 2)
Page 8 of 11
5 - 5. Fasten the last ladder step (H) to the bottom handrail tube and
insert the top handrial tube (L - a) to the bottom handrail tube (L - b)
by using bolt (B) x 1 + square washer (U) x 1. (Figure 3)
5 - 6. Make the slide chute of Step 4 go through the Top handrail tube (L - a) of Step 5
by using bolt (B) x 1 + washer (D) x 1+ spring washer (E) x 1 and
domenut (F) x 1. (Figure 4) Insert plastic cap (R) into the top of handrail tubes
and both side of ladder stabilizer bar.
Step 6 Assembling the Tie Bar
6 - 1. Fasten the tie bar (G) and (K) together by using bolt (B) x 1 + washer (D) x 1 +
(Figure 1)
(Figure 2)
(Figure 3)
Step 4
Step 5
(Figure 4)