Slide Freedom Automatic Spray Unit
Item # 43200
The Instructions are for Freedom Units made with the IDEC PLC unit
Page 8
January, 2022
The spray nozzle size that has been included with the unit is:
1/8 MEG - 15035
The spray nozzle characteristics are explained as follows:
1/8 is the inlet connection size
MEG is the spray nozzle type (high impact)
15 is the degree angle of the flat spray pattern
035 is the capacity which at 50 psi is approximately 5.6 liters of flow
per minute
If your process requires different or alternative spray tip angles or flow
rates, please visit
www.spray.com
to buy replacement tips directly
from this supplier.
Solenoid Function
For maintenance or repair suggestions for the solenoid units, please
visit the manufacturers website for their recommendation:
https://ph.parker.com/us/en/parker-2-way-normally-closed-1-8-npt-general-purpose-
solenoid-valves/7121kbn1nf00n0d100p3
The full part # for the Parker Solenoid valve used on this unit is:
Parker 2-Way Normally Closed, 1/8" NPT General Purpose Solenoid
Valves | #7121KBN1NF00N0D100P3
If you prefer to find a local Parker office to work with, you can find
their local locations by visiting the Parker site:
https://www.parker.com/portal/site/PARKER/menuitem.98bf0856fd643a238c23b35b832
0d1ca/?vgnextoid=894fb34395d2b210VgnVCM10000032a71dacRCRD&vgnextchannel
=894fb34395d2b210VgnVCM10000032a71dacRCRD&vgnextfmt=EN&from=parkersto
re&citype=ParkerStore
