7
Caller ID system operations
Subscription to Caller ID service from your local phone company is required
before the first use.
•
New call indicator
- The red indicator light of your phone will flash to indicate that you
have new calls until all the new calls have been reviewed.
•
Review your call records
- Use the
▲
or
▼
button to scroll through the caller list. If
the call is more than 13 digits, an arrow will be shown on the right bottom corner of LCD,
press the
▲
or
▼
button once to review the other digits, press the
▲
or
▼
button again
to review next call. You can review the records quickly by holding the
▲
or
▼
button for
about 3 seconds. At the end of the call record list, you will see the
END OF LIST
message. Press the
▲
or
▼
button to continue.
•
Save call records
- Your phone automatically stores up to 99 call records. Once the
memory is full, the phone will automatically delete the oldest call record from the list. You
can free up memory space by manually deleting record(s).
•
Delete single or all records
- In the on-hook state, use the
▲
or
▼
button to select
the record which you want to remove, press the
DEL
button, the LCD will show
DELETE?
and then press the
DEL
button again to remove this record, press any button to exit. If
you press the
DEL
button for about 6 seconds, the LCD will show
ALL DELETE?
and
press the
DEL
button to remove all records and the LCD will show
NO CALL
.
• Using the call back feature
NOTE
: If the number is blocked or is not available, it can not be called back.
A. Call back an outgoing number: the phone stores your most recently 15
dialed numbers.
1. In the state of on-hook, press the
RD/P
button once, the last dlalled number will
be showon the LCD, then use the
▲
or
▼
button to select the number that you
want to dial out.
2. Pick up the handset or press speakerphone button, the phone number can be
dialed out automatically.
B. Call back an incoming number: the phone stores up to 99 incoming
numbers.
1. Lift the handset or press speakerphone button, wait for a dial tone.
2. Select the caller that you want to call back by pressing the
▲
or
▼
button.
3. Press the
DIAL
button to dial the phone number shows on the LCD.
or
In the on-hook state, use the
▲
or
▼
button to select the call you want to call
back, then pick up the handset or press the speakerphone button, the phone
number is dialed out automatically.
