page 2
LEDs
1.
Power Indicator:
Steady green when power on, blinking green when the call is ringing. Blinking red
when there are new messages.
2.
Line Keys:
a. Steady green:
During the conversation, or plan to dial a call.
b. Blinking red:
The call is ringing.
c. Off:
Idle interface.
Calls
1. Place a call
(three different modes):
a.
Handset:
Pick up the handset; enter the number, then press the Send soft key or press
#
.
b.
Speaker
: Press
or the line keys; enter the number, then press the Send soft key or press
#
.
c.
Headset:
Press ; enter the number, then press the Send soft key or press
#
.
Note:
You can also use Contacts or call log to dial the number you want, press dial key place
the call by the three ways mentioned. More, you can also alternate to the mode during the
call
2. Answer a call
(three different modes):
a.
Handset:
pick up the handset;
b.
Speaker:
Press
;
c.
Headset:
Press
.
3. End a call
(three different modes):
a.
Handset:
Hang up the handset or press the Cancel soft key.
b.
Speaker:
Press
or press the Cancel soft key.
c.
Headset:
Press the Cancel soft key .
UWAGA: You can also reject the call by press the Reject soft key.