SleuthGear iTrail GPS Logger, Быстрый старт

Страница: 5 / 36

Note:
1. Find the LED indicator demos in iTrail GPS Logger LED indicators .
2. For more detailed information on the GPS fix, correct wear and use of your iTrail GPS Logger, please refer to Essentials for
Beginners .
iTrail GPS Logger LED Indicators
The following lists various LED indications of iTrail GPS Logger:
Main indication:
Power On
The blue LED indicator blinks once.
Operation: Long press (1.5 seconds) the button to power on iTrail GPS Logger.
Note: When the device is powered on and starts tracking, the blue LED indicator blinks
every 4 seconds.
Data Logged
Both the red and blue indicators blink simultaneously twice.
Status: Device is powered on and GPS data has been logged successfully.
Power Off
Press the button for a couple of seconds, and the red LED stays red until iTrail GPS
Logger is powered off.
Memory full / Battery low
The red LED blinks: twice / once.
Others:
Charging The red LED indicator stays on during charging and goes off when charging is complete.
Status: The device is connected to power sources, such as computer USB port.
Push-to-log The blue LED indicator blinks once, followed by both indicators blinking simultaneously twice.
Status: Device is powered on and functions normally.
Operation: Press the button once to log the current GPS information.
Data Transfer The red LED indicator stays on, and the blue LED indicator blinks randomly.
Status: The device is connected to PC and transferring data.
GPS Receiver The blue LED indicator blinks steadily.
Status: Receiving GPS information for the connected navigation device/software.