Sleipner SAC1100-I-4-V Скачать руководство пользователя страница 4

4

6054

9

2022

-

AC user manual

User Operation

General operation

1.    Turn on the main power switch for the bow thruster. 

(NB: Always turn off the main power switch when not on-board.)

2.    Turn on the control panel by pushing the/ both “ON” button(s) on the original Sleipner panel simultaneously. 

 

*Turn off the control panel by pushing the “OFF” button

3.    To Turn the bow/ stern in the desired direction: 

The following is an operation guide to ALL Sleipner control products. Ensure to familiarise yourself with the functionality and operation of your specifi c 

control device.

Take time to practice operation in open water to become familiar with the thruster and to avoid damages to your boat or people.

Hold Button

+ or - 

Will increase or decrease the holding force output of the thrusters

Button control panels

For button control, push the button in the 

corresponding direction you wish the bow/ stern to move. 

Joystick control panels

For joystick control, move the joystick in the direction 

you wish the bow/ stern to move.

(NB: If equipped for proportional control move the joystick equivalent to the amount of thrust you intend to receive.)

* For other controls like foot switches or toggle-switches please refer to that products user manual for detailed operational use.

Hold functionality

If equipped with ‘hold’ functionality push the button in the corresponding direction you wish the thrusters to engage a holding pattern: 

Operating a combined bow and stern thruster

The combination of a bow and stern thruster offers total manoeuvrability to move the bow and the stern separately from each other or in unison. This 

enables the boat to move sideways in both directions or turn the boat around a 360º axis while staying stationary.

Remote controls

Drift

Depending on the sideways speed of the bow/ stern, you must disengage the control device shortly before the vessel is in the desired position. 

(NB: Be aware the boat will continue to move after disengaging the thruster control.)

 At any signifi cant cruising speed (+1-2 kn) the side thruster will have little effect to steer the vessel.

Ensure the remote control is held in the same direction as the boat during operation.

MC_0059

!

 Please refer to the graphic for special considerations relating to your model 

!

Compatible Control Device Products

MC_0354

!

 Please refer to the graphic for special considerations relating to your model 

!

PJC211  

PJC212  

 

PRO proportional CONTROL PANEL

RCS-20  

 

S-Link REMOTE CONTROL

For additional 

information refer to 

your control device 

manual 

MG_0394

Proportional Control Panel

*Bow thruster 

installation only

*Stern thruster 

installation only

*Bow and stern 

thruster installation 

*Bow and stern 

thruster installation 

Activating the bow thruster

*Control panel example

*Control panel example

*Control panel example

Activating the stern thruster

Activating both bow and stern thruster 

to rotate the boat on axis

Activating both bow and stern thruster 

to push the boat sideways

*Control panel example

Содержание SAC1100-I-4-V















Отзывы: