Installation & User Manual, Radio Remote RC10XE
Page 10
How to use a bow thruster
1. Turn the main power switch for the bow thruster on. Turn on the power to the receiver.
2. Turn on the transmitter by pushing both “ON” buttons at the same time. The remote system is
now activated and then turns off automatically appr. 4 min. after the last usage (see page 9).
3. Please take some time to exercise thruster usage in open water to avoid damages to your boat.
4. Turn the bow in the desired directiony by pushing the red button for port movement or the
green button for starboard movement.
How to use a bow & stern thruster combined
The combination of a bow and stern thruster offers total manouverability to the boat and the
opportunity to move the bow and the stern separately of each other. The remote middle buttons
gives you the opportunity to operate both thrusters in the same direction with one keypress,
making sidewards movement easier.
Remote Control Deactivation
Push the transmitter’s “OFF” button for 2 seconds (the remote control deactivates automati
-
cally after approx. 4 minutes after the last usage). Turn off the power switch for the receiver.
• If in doubt, try in open water first!
Remote control “ON”
Turn boat to Port
Bow + Stern thruster
Remote control “OFF”
Turn boat to Starboard
Auto-OFF
appr. 4 min.
Hold for
2 seconds
