Sleep Science Q Series Скачать руководство пользователя страница 18

Страница: 18 / 21

Weight Recommendations and Limits

The recommended weight restriction for the Q Series Adjustable Base is 750 pounds, which is calculated to include the

weight of the mattress. In order to calculate the weight limit subtract the weight of the mattress from 750 pounds. The

bed will support the recommended weight limits if distributed evenly across the base. This product is not designed to

support or lift the total maximum weight limit by the head or the foot section only. Consumers should not enter or exit

the bed with any portion of the adjustable bed base in the raised position. Always return the bed while the bed is in a

raised position. If the weight limit is exceeded on the head or foot mechanism, the master controller will stop all

functions. Exceeding the recommended weight restrictions could damage the bed and void the warranty.

Need Assistance? Call us at 1-800-723-0316 from 8:00am to 5:00pm PDT Monday - Friday

Содержание Q Series






















Результаты поиска

Содержание Q Series

Отзывы:

Бренды по названию

Популярные бренды

Sleep Science Q Series, Руководство пользователя

Результаты поиска

Содержание Q Series

Отзывы:

Бренды по названию

Популярные бренды