B) Remove the bed legs from leg box. Tighten legs by hand. Turn
over the base carefully, using at lest two people.
www.SleepNaturalNow.com
V) Foot Up Motor
W) Head Up Motor
STEP 3: Install motors and legs
O) Long Motor Plug / P) Short Motor Plug
L) Small Washer
Q) Nylon Washer
S) Non-slip Nuts
Installation
(One-Piece King bases)
Motor head position
Motor head position
A) Cut off the cable ties of the motor, remove the protective film, and remove the corresponding parts
from the accessory box. Install the motors with long motor plug (for motor head position) and short
motor plug (for motor foot position). Motors without label facing up.
STEP 4: Connect power supply
(see page 6)
