Sleek Fence Canada
855.875.0855
SLEEK FENCE INSTALLATION GUIDE
POST PROTECTION
Leave the plastic wrap on the posts until you are ready to
install panels.
POST SPACING FOR 72” WIDE PANELS
Where possible, install fence posts 72.25” to 72.5” apart –
between posts, not center to center of posts.
POST SPACING FOR 40” WIDE GATES
Install gate posts 41.5” to 42” apart – between posts, not
center to center of posts.
POST DEPTH
For in ground applications, posts must be installed between
22 and 30” deep, set in concrete.
SET POST HEIGHT
Using a string line with a line level, or a leveling laser - mark
out the finished height of your posts, and cut them to the
appropriate height using a circular saw with a fine tooth
blade, jig saw, or handheld bandsaw. We recommend the
posts stick up above the panels about 3 inches and are
capped with our pyramid posts caps for a finished look.
PANEL PROTECTION
Cut the plastic open on the left and right sides of the panels but leave it intact until the fence is completed.
GENERAL
All panels come prefabricated, and with what we call an “F” channel. This is what you use to fasten the panels to the posts.
B) INSTALL PREFABRICATED PANELS
Panel mounted to post
F channel
