78°
0.7 m
0 m
1.0 m
1.6 m
1.0 m
78°
MOVEMENT SENSOR
Scanning zone
The scanning angle of the PIR sensor is 78% both vertically and horizontally. In the distance
of 0.7 m from the sensor, the scanning zone will be 1 m wide (see the picture above).
Sensor position: POSITION 1
Movement sensors in the dressing rooms
which are not closed from all sides could
detect movement also from the outside of
the cubicle. In that case, pull the sensor
to the position just below the edge of the
mirror. This way, the scanning zone of the
sensor will be limited only to the space
for feet. If necessary, you can adjust the
position according to the needs of the
cubicle space.
NOTE: It is quite hard to move the pulling
mechanism. Be careful not to break it when
applying force.
Sensor position: POSITION 2
Movement sensors in the dressing rooms
which are closed from all sides can be pulled
to maximum so that the mirror would not
interfere with the scanning range at all.
Sensor position: HIDDEN
When buying the Smart Mirror, the
movement sensor on the bottom side is
hidden behind the mirror.
