@ACTION SPORTS EQUIPMENT PTY LIMITED – www.actionsports.com.au
Page: 19
6.
Pull the Elastic Toggle (H) to the nearest v-ring and
secure as shown in Figure 6.
7.
The recommended Safe Play Area is to be 250cm
(2.5 metres) of clear area around the perimeter of
the trampoline, free of any obstructions or
potential hazards. There should also be no
obstructions above the trampoline up to a height
of 700cm (7metres) above the jumping mat
surface.
The Safe Play Area must be on level ground, free from all structures, landscaping,
trees and branches, rocks, wires, sprinkler heads and other obstacles. Children can
be seriously injured running or colliding into such obstacles.
ENCLOSURE ASSEMBLY
Pole Assembly
1.
Attach the Upper Support Poles (J) and the Lower
Support
Poles
(K)
which
have both
been
pre-assembled with foam (See Figure 1). Ensure
spring loaded locking pins are aligned with locking
holes and pin locks into position.
2.
Slide the assembled Support Pole (J & K) done in
step 1 into the Foam Sleeve (L). Cover the entire area
of the Support Pole’s Foam. (See Fig.2).
