16
Troubleshooting
Problem
Action
The operation status
LED is not turned on.
If the operation status LED is not responding even
▶
after turning on the power switch, it is because the
battery is discharged. Use after charging it
sufficiently.
Device registration
can not be done.
▶
Registration should be made from the user’s
Bluetooth device after setting the headset to the
registration status and turning on the Bluetooth
operation of the Bluetooth device. (Please refer to
the Bluetooth device usage from the user’s manual
of the Bluetooth device.)
Authentication code is
Not working.
When connecting between Bluetooth devices, the
▶
accurate authentication number should be entered.
(In case of this product, the number is “0000”).
It has bad
connections.
It is frequently
disconnected while
listening to music.
The radio wave is not sta
▶
ble. Please try to use it in
another location.
It is either under a bad status of receiving radio
▶
waves due to an obstacle between Bluetooth
devices or by a long distance between them. Please
make shorter the distance between two devices.
The battery standby is
too short.
Since battery is a consumable article, its
▶
standby
time will get shorter from the initial use.
The use time can be shorter if the charged product is
▶
left in a low or high temperature for a long period of
time.
Heat is generated
from headset .
It requires a consider
▶
able amount of current while
talking. Heat is generated in this process and when
talking or playing music for a long period of time.
You may continue to use since it doesn’t influence on
▶
the lifetime and performance of the product.
