Slamtec SDP Mini, Руководство пользователя

Страница: 7 / 8

b.
c.
i.
ii.
in the dialog box. delete
When the network changes, follow the following steps to switch the Station mode back to AP mode so that we can reassign the ip
address:
As shown below, remove the jumper in J22 on Breakout 3.0 board of SDP Mini and put it on the GND pin and RX2 pin of
the same interface, then restart the SDP Mini. (Except for the buzz of normal launch, the SDP Mini will emit a longer buzz
to indicate a successful WiFi reset. )
After launching the SDP Mini, connect it to the computer with network cable, and then login to 192.168.11.1 in Chrome( Defa
). Go to on the upper right corner of the page choose
ult username: admin; default password: admin111
Administration Co
on the left panel choose button in the bottom of the page. nfigure WiFi Restore
After resetting, please turn the switch off and put the jumper back to normal state to ensure that the SDP Mini
will work well later.