SLAM SPECIALTIES
Control Systems
Model No. : MC.1-SS
Made in USA
Contents:
(1) Handheld Unit
(1) Receiver Unit
(9) Male Bullet Connectors
(1) 10A ATC fuse
(2) Self tapping screws
(1) 3/8” Grommets
Dimensional Data:
3.775”
1.45”
0.895”
1.95”
www.slamspecialties.com
1.888.352.5225
OFF-ROAD/SHOW USE ONLY
pg 2/3
.187”
Aux Operation
The Auxiliary function of the MC.1 is pre-programmed from the factory to
energize the fill valves when triggered with a ground/negative trigger. This is
only the case when the controller is configured as shown in Fig 2.
In the event the controller is installed in the configuration as shown in Fig 3,
press and hold both the fill and dump button (circled in Fig 2, or Fig 3) for three
seconds. The LED on the bottom of the controller will flash red/green to
indicate that the function has changed from fill to dump, or from dump to fill.
This change will remain stored in the controller until re-programmed by doing
this process again.
Check www.slamspecialties.com for more information
