b4 Adventure 4040 Holly Street Unit 10
•
Denver Colorado 80216
•
1-844-834-4334
[email protected] · www.slackersline.com/help-center/
303-339-0482 -
DC:031516
3
3. ATTACHING YOUR LADDER
If you are using a tree branch or NINJALINE™
you can just wrap your NINJALADDER™-Figure 1
For larger branches, you can use a B4A.109-6 foot or
B4A.110 12 foot Sky Hanger kit-(both sold separately)
•
Choose a tree branch with an area clear of obstacles,
debris or anything that could cause injury.
•
YOU MUST
select a healthy tree branch that is at least 10 inch(26cm)
in
diameter
or 32 inch (82cm) in
circumference
at the portion of
the branch you are going to attach to.
•
If you are unsure about the health of your selected tree branch,
consult an arborist. Tip: One good place start looking for an
http://www.isa-arbor.com/findanarborist/findanarborist.aspx
WARNING: DO NOT CREATE A HEAD TRAP!!!
You must leave at least a 10 inch or more gap
between the bottom of the branch and the top dowel!
INSTALLATION GUIDE FOR WRAPPING AROUND A HEALTHY TREE BRANCH OR A NINJALINE™
Step 1-Insert ladder bottom Step 2-Pull ladder through Shown above on a NINJALINE™
though top portion forming a forming a tight loop on the Note: you can adjust the
loop. branch/line. the hanging height by making
multiple loops around the line.
10 inches
Healthy Tree branch with
at least a 10 diameter.
Must be
At least
10+ inches
of gap
Insert the bottom of
Ladder through
top portion
Note how the ladder is
wrapped multiple times around
the Ninjaline™
