NOTE: The mode selector has priority and preempts any speed indicated by the Digi
Switch
2. Digi Switch (Push Pin Switch). Any speed from 00.01 to 80.00 Fps can be selected.
All speeds are crystal controlled. Settings on the Digi Switch are only recognized when
the mode selector is set to “A”.
The camera is started and stopped by use of the Run / Stop toggle Switch.
REVERSE OPERATION
The camera can be operated in both forward and reverse. To select reverse, use a small
flathead screwdriver and turn the selector until the reverse LED lights red. All camera
speeds are respected in both forward and reverse.
LED DISPLAY
At rest, the LED display shows the footage shot in feet and frames. At run, the frames
indicator is replaced by camera speed (i.e. 24 FPS)
FOOTAGE RESET
The footage counter can be reset at magazine changes simply by depressing the Footage
Counter Reset Button. The footage counter is also fully functional in reverse.
CAMERA ACCESSORIES
External speed controllers and remote switches can be used by connecting them through
one of the two Fischer 11 connectors on the back of the camera. Each of the connectors
can provide up to 12V and 4.25 amps of supporting power.
24 Volt accessories can be powered by one of the two power connectors on the front face
of the camera. These ports reflect the voltage of the main power battery.
CHANGING LENS MOUNTS
Lens mounts should be performed and checked by qualified individuals. Not doing so
can result in unacceptable images.
