RF Mode
·
Press the <CHANNEL> button to adjust channels and <BAND> button to adjust bands in circular manner,
then the screen will display BAND, CH and frequency.
Front Camera
·
The font camera of such FPV glasses has VGA resolution and good low illuminance, enabling to easily
observe surroundings very easily without taking off the glasses.
·
In any mode, you may press the <CAMERA> button quickly to open the front camera.
·
The front camera is designed only for temporary view to see surroundings; so it cannot AV output.
Image Adjustment
·
Press Center button in the image setup menu, achieve personalized display effect.
·
It's easy to setup the Brightness, Contrast, Saturation, Hue and Sharpness with the 5-direction switch.
·
Press the <UP/DOWN> button to select menu, Press the <LEFT/RIGHT> button to adjust value.
·
It is recommended to set such parameters in very clear image state.
·
Press Center button 3 seconds to setup image to factory default
Head Tracking
·
Head tracking needs initialization time. When powered on, be sure to keep the product horizontal and
stable. When you hear “Beep”, it means the initialization is completed and you may start to use head
tracking; or you may press the <TRACK> button shortly when this device keeps stable to use such
function normally.
·
Press short <TRACK> button to reset the PPM signal to the central location with warning tone.
·
In menu, you may set PPM channels as CH5-CH6, CH5-CH7, CH5-CH8, CH6-CH7, CH6-CH8 or CH7-CH8.
·
Pan Tracking range: 180° (90° for left and right respectively), 120° (60° for left and right respectively),
90° (45° for left and right respectively), 90° as default.
·
Tilt Tracking range: (60° for left and right respectively), 90°(45° for left and right respectively), 60°(30°
for left and right respectively), 90° as default.
·
Pan Correction: Via such setup, you may separately compensate the central deviation of Pan. You may set
it at 0~10 levels, and the actual compensation angle is related to the turning angle of the cradle head.
·
Tilt Correction: Via such setup, you may separately compensate the central deviation of Tilt. You may set
it at 0~10 levels, and the actual compensation angle is related to the turning angle of the cradle head.
·
PPM Reverse: <Normal> as default setup, <Pan> as the reverse of such channel, <Tilt> as the reverse of
such channel
，
<Pan & Tilt> reverse in two directions.
AV IN
·
This device supports AV IN. When the AV IN connection cable is inserted, it may automatically turn off the
radio reception module to save power.
AV OUT
·
The AV OUT port outputs the audio and video signals of diversity reception.
·
The earphone port may connect with a headset. When this device is powered on every time, be sure to
minimize the volume of the headset in order to prevent large noise from affecting your hearing.
Factory Settings
·
Enter the system menu, choose the option of “Factory Settings”, press the <OK> button to enter the setup
state, press the <UP/DOWN> button to choose <YES>, and the <OK> button again to restore all the
functional settings in the menu to factory settings.
Содержание SKY01S
Страница 1: ...SKYZONE SKY01S FPV GOGGLE USER MANUAL...
