SkyZone SKY01, Руководство пользователя

Страница: 4 / 6

·
Press Button "CH" once to select from CH1 to CH8. Different beeps refer to different channels.
Beep Receiver Channel
1 short beep CH1
2 short beep CH2
3 short beep CH3
4 short beep CH4
5 short beep CH5
6 short beep CH6
7 short beep CH7
8 short beep CH8
Head Tracker
PPM Channel Setup
·
Press and Hold Button "TRACK", then connect power to enter Head Tracker Setup Menu (Release as soon as beep).
Head Tracker beeps indicating the current PPM Channel. See details below.
·
Short Press "TRACK" Button to select different PPM Channels. Long Press the button to enter Pan Tracking Range
setting mode.
·
Beep PPM Channel
1 short beep Pan CH5,Tilt CH6 (Factory default)
2 short beep Pan CH5,Tilt CH7
3 short beep Pan CH5,Tilt CH8
4 short beep Pan CH6,Tilt CH7
5 short beep Pan CH6,Tilt CH8
6 short beep Pan CH7,Tilt CH8
Pan Tracking Range Setting
·
1 long beep refers to 90 degrees, 2 long beeps refer to 180 degrees
·
Short Press "TRACK" button to change the working Range with corresponding beep
·
Long press "TRACK" to return (with 1 short beep) PPM channel setup mode.
Please disconnect the power after setup and then reconnect to enter normal working mode.
Short press "TRACK" button is ok to setup head tracker into Center position while working.
Front Camera
·
The Front Camera is Wide-Angle Camera with 680X480(VGA) Resolution and good low Illumination. It's very
convenient to view around without taking off the Goggles.
·
Press "Camera" button to open the Front Camera.
Volume
·
Each boot is automatically set to the lowest volume to avoid sudden loud boot.
·
A long beep indicates that you have reached the MAX or MIN Volume. .
Display Setup