background image

1.  Required Equipment

The following equipment is required to demonstrate the evaluation board:

• One signal generator
• One dual dc power supply: 0–5 V and 0–15 V (or two single supplies)
• 1 oscilloscope (at least two channels)
• Assorted cables, leads and probes as necessary to connect equipment to EVB
• Si823Hx evaluation board (board under test)
• Si823Hx evaluation board user’s guide (this document)

1.1  DC Supply Configuration

1. Set one supply to output 5 VDC.
2. Turn OFF the supply and connect the positive lead to VDDI (J1 pin1 or TP1).
3. Connect the negative lead to GNDI (J3 or TP3).
4. Turn ON the dc power supply.
5. Ensure that LED D1 turns on.
6. Ensure that the current draw is less than 25 mA. If it is larger, this indicates that either the board or Si823Hx has been damaged or

the supply is connected backwards.

7. Set the other supply to output 15 VDC.
8. Turn OFF the supply and connect the positive lead to VDDA (J2 or TP2).
9. Connect the negative lead to GNDA (J4 or TP4).

10. Turn ON the supply.

11. Ensure that LED D2 turns on.

12. Ensure that the current draw is less than 100 mA. If it is larger, this indicates that either the board or Si823Hx has been damaged

or the supply is connected backwards.

1.2  Function Generator

1. Turn ON the function generator with the output disabled.
2. Adjust its output to provide a 500 kHz, 0 to 5 V peak square wave (50 percent duty cycle) to its output.
3. Connect the output of the generator to VIA (TP5, ground on TP6).
4. Ensure a shunt is placed on TP3 between pins 2 and 3 (connects VIB to GND).

a. If the board being tested is Si823H2 or Si823H9, ensure a shunt is placed on JP4 between pins 1 and 2 to enable the device.
b. If the board being tested is an Si82520, ensure that the shunt on JP4 is between pins 2 and 3 to enable the device.

5. Enable the output of the waveform generator.

UG367: Si823Hx-EVB User's Guide • Required Equipment

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com

2

Rev. 0.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • December 21, 2021

2

Содержание Si823H-EVB Series




















Отзывы: