Si57x-EVB
14
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
Rev. 0.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • December 14, 2021
5. The operating system will install the driver. Click
Finish
in the last wizard window.
Verify the driver is installed by opening the Device Manager and expanding the "Universal Serial Bus controllers"
section. The USBXpress entry should exist as shown in the figure. This entry appears only when the board is
connected to the PC via USB, and powered on.
Figure 8. USBXpress Driver Entry in the Device Manager
4.4. EVB Software Installation
The software may be installed from a CD packaged with the EVB kit. This software may also come via a zip file.
The installation is similar regardless of how the software is distributed.
To install:
1. Navigate to the
Software
directory.
2. Double-click on the
Setup.exe
file.
3. Follow the steps in the wizard to install the program.
Note:
Use the default installation location for best results.
4. After the installation is complete, click on
Start
Programs
Skyworks
Programmable Oscillator
Software
. Select one of the programs to control the EVB and device.
5. Refer to the online help in each program by clicking
Help
Help
in the menu.
To uninstall:
1. Open
Add/Remove Programs
in the Windows' Control Panel.
2. Select
Programmable Oscillator Software
in the list.
3. Click
Remove
.
4. Follow the steps in the Wizard for complete removal.