Note: SkyWing’s products are updated frequently. As a result, there might be minor
inconsistencies between this manual and the product being built.
2
1.
Hinge the ailerons with CA
2.
Glue the included aileron horns to the
precut plywood piece. Do not apply too
much glue.
3.
Install the quick adjuster to the servo arm
and the push rod.
4.
Install the tail servos. You can use a thread
with a weight to fish the servo lead and its
extension through the fuselage, as shown
in the photo.
5.
Now install the horizontal tail: insert the
elevator first and then the stabilizer.
6.
Make sure the tail is symmetrical about
the fuselage axis.
