SkyWing 39-in Series
Page 2
(Your kit content may look different from the parts shown in this manual. However, the steps
and explanations should apply to your build.)
1.
Before you start your build, make sure you
have all the accessories.
2.
Insert the wing and make sure it is
symmetrical about the fuselage axis.
3.
Apply CA (not too much) to glue the wing
and the fuselage together.
4.
Install the horizontal tail (insert the
elevator first, and then the stabilizer)
5.
Make sure the horizontal tail is
symmetrical about the fuselage axis.
6.
The distances from the elevator tip to the
wing tip should equal on both sides.
7.
Make sure that the horizontal tail is
parallel with the wing.
8.
Then apply CA.
