background image

 

Appendix Data 

 

Connector Pin-out 

 

Pin 1   

Digital Input (0 = +3 to +25 VDC; 1 =  -3 to  -25 VDC)  

 

            

Pin 2   

RS-232 Rx Data from user   

 

 

 

  1                  5 

Pin 3   

RS-232 Tx Data to user 

 

 

 

 

         •  6 

Pin 4   

Ground and Shield 

Pin 5   

Input Power +9 to +30 VDC   

 

 

 

 2 

 

Pin 6   

Digital Output (0 = +5.5 VDC, 1 = -5.5 VDC) 

 

 

 

 

 

 

 

 

 

 

 

 3 

Mating Connector 

 
Conxall #MINI-CON-X® 6282-6PG-3xx 

 

LED Indicators 

 

The Solution Provider can configure the DMR-200C to disable all LEDs (except the startup sequence). The 
following table outlines the LEDs state in the DMR-200C’s default operational mode. 

 
 

STAT

  This LED flashes to indicate the DMR-200C’s current operational state.  

 

Tx

 

Indicates when the DMR-200C is transmitting. 

 

ERR 

When on continuously indicates

 

that the terminal has detected an internal problem. In this case, contact 

your

 

Solution Provider for instructions.

 

Warranty Information 

 

Warranty

  

 
SkyWave warrants its products and services will perform in accordance with SkyWave’s specifications and will 
be free from defects in material and workmanship for a period of twelve (12) months from

 

date of shipment. 

This warranty is limited to the repair and/or replacement of any defective components experienced under 
normal specified operating use and storage conditions, at SkyWave’s discretion. It does not cover any 
damages caused or associated with the product’s misuse. Experience with defective products should be 
communicated to your Solution Provider. Shipping of defective product, back to the Solution Provider will be in 
accordance with the Solution Provider’s instructions and should be accompanied with a fault report.  Warranty 
is void if unit is opened. 

 

Limited Liability

  

 

SkyWave’s liability is limited to the cost of repair or replacement of any of SkyWave’s products during the 
warranty period. Consequential, indirect or similar damages associated with product application and usages 
are disavowed. SkyWave’s products are not suitable for life critical applications. SkyWave’s aggregate liability 
shall in no circumstances exceed the product’s price as paid to SkyWave and this limitation of liability is 
reasonable given the price of SkyWave’s products, which reflect reasonable allocation

.

 

 

SkyWave Mobile Communications Inc. 

30 Edgewater Street, Unit 110 

Kanata, Ontario, Canada K2L 1V8 

Phone: +1 613 836-4844  Fax: +1 613 836-1088 

         

www.skywavemobile.com

 

Form: DC500198 Rev A 
Date: 7/26/02 

Содержание DMR 200C







Отзывы: