23
Your trampoline and enclosure are fully assembled now.
Make sure that all parts are securely attached.
Familiarize yourself and all users with the trampoline
and enclosure with the safety precautions, use and
instructional materials, and care and maintenance
instructions in this manual before using the trampoline
and enclosure.
Disassembly
To disassemble the enclosure and trampoline, follow assembly steps 1 through 11 in reverse order.
Replacing the Enclosure net
If your Enclosure net is damaged after using a period of time, you need to replace it by following assembly steps
4-7 and 10-15 in reserve order.
14
15
wind stakes
14. Using the included plastic tie, attach the Safety Placard
to the frame near the point where jumpers will climb
onto and off the trampoline.
15. Insert one wind stake(23) into the ground over the
trampoline leg as shown.Then insert the others in the
same way on the other three legs as shown.
Safety Placard
23
Frame