04
Charging
The board and controller need to be fully charged prior to first use.
Ensure that both the board and controller are powered off when charging.
Only use the supplied adaptor with the unit.
Power off the skateboard if it is on.
Plug the supplied power adaptor into the power socket on the skateboard.
The light on the charger will turn red while charging, and green when fully charged.
Unplug the unit once the charge is completed.
It typically takes about 3 hours to fully charge the skateboard batteries from empty.
Notice:
Using any other charger may cause damage to the control board or batteries, and will void your warranty.
Charging the Skateboard
The controller uses a standard micro USB cable to charge.
Insert the supplied USB charge cable into the bottom of the remote controller.
Make sure that the cable is oriented correctly when inserting into the controller.
Plug the other end of the USB cable into the charger, and plug into a power socket.
It typically takes about 2 hours to fully charge the remote.
Charging the Remote Controller
