1
FASTEN WALL PLATE TO WALL
Note: This product should be mounted to solid brick, concrete, or hard wood batten/studs wall.
1a: SOLID BRICK AND CONCRETE BLOCK MOUNTING: Use the Wall Plate (a) as a template to mark 6 holes locations
on the wall. The outer holes must fall to the outside of the two large holes in the middle of the plate. Three in the top
row slots and three more in the bottom row. Make sure these holes are level and there is at least 200mm between any
two holes. Pre-drill these holes with a 10mm masonry bit to at least 60mm in depth. Insert a Concrete Anchor (f) into
each of these holes. Attach the Wall Plate (a) to the wall using 6 Lag Bolts (e) and 6 M6 Washers (d).
1b: HARD WOOD WALL MOUNTING: The Wall Plate (a)
MUST be mounted to two wood studs.
Use a high quality stud
sensor to locate three adjacent studs. It is a good idea to verify where the studs are located with an awl or thin nail (as
shown in diagram 1-A) Pre-drill a 3mm deep hole at the desired height in each stud using a 4mm drill bit. Use the Wall
Plate as a template to mark the location of the second hole in each stud. Pre-drill these holes using the 4mm drill bit as
well. Attach the Wall Plate to the wall using the 4 Lag Bolts (e) and 4 M6 Washers (d). Make sure the Wall Plate is ori-
ented so that the flat surface in the center of the plate is against the wall (as shown in diagram 1-C).
Note: Do not use any concrete anchor when you mount the bracket onto hard wood wall.
Tip: To assist in
installation, the
wall bracket
features a screw
slot for temporary
hanging of the
bracket.
1-A
1-B
1-C
ASSEMBLY INSTRUCTIONS
FOR ADJUSTABLE FLAT PANEL WALL MOUNT
This product is designed to mount flat panel televisions weighing up to 75 kgs to a vertical firm wall.
Safety Warning:
Before assembly, inspect contents and ensure that there are no missing or defective parts. Never use defective parts.
Improper installation may cause damage or serious injury.
Note: The included hardware is to be used for mounting on
walls If you are uncertain about the nature of your wall, please consult your hardware or installation professional for prop-
er mounting to other types of walls. The supplied hardware is not intended to be used on steel.
WARNING: DO NOT MOUNT ONTO PLASTERBOARD OR PANELED WALLS.
Содержание Royal Mounts R0Y5400b
Страница 1: ...32 55 screens 37 70 screens ...
