Skywalker OWTC15, Руководство пользователя

Страница: 19 / 25

Attach another two lateral V-rings to frame holes in the
same way as 5.2
Now there are12 V-rings are attached to the Top tube.
And 12 Springs have been used.
Enclosure door
V-ring
Frame
5
8
Attach the Spring as follows:
Hook one end of Spring into the V-ring sewn on Jumping mat.
Hook a Spring Tool as shown to the free end of the Spring.
Pull the Spring until it reaches the frame.
There are 96 springs around the edge of Jumping mat(5)
and 96 holes around the top tube.
It is wise to wear leather gloves while attaching the springs.
Be careful where you place your hands as the Springs and
Frame joints can pinch.
A:
B:
C:
Push the end of the Spring into a hole in the frame, then unlook
the Spring Tool
D:
NOTE:
CAUTION:
5.3
NOTE:
Count exactly the quantity of V-rings and the spring holes
on frame top, make sure each of them are corresponding
.
Attach other V-rings to frame holes on left side of
T-joint or Socket in the same way as 5.2
5.4
T-joint
19