background image

18

LIMITED WARRANTY

Skywalker Holdings, LLC warrants its products to be free from defects in material and workmanship under normal 

use and service conditions. 

The steel frame is warranted for three (3) years after the date of purchase. All other 

parts are warranted for one (1) year after the date of purchase.

 Warranty coverage extends only to the original retail 

purchaser from the date of original purchase. This warranty is only valid concerning products used for residential 

use. Products used for commercial use, such as schools and daycares, will not be covered.

Weather Damage:

 The warranty does not cover damage due to the effects or acts of nature, such as 

earthquakes, wind, hurricanes, tornadoes, lightening, rain, fire, snow, excessive heat and cold conditions 

and/or sun damage. During the winter months the soft materials will need to be removed and stored in 

a dry place out of the snow. If left unprotected in the winter months, some components may become 

damaged, voiding this warranty.  

Fading and Rust:

 Our products are fully galvanized and/or powder-coated.  We do not warrant against 

rust or corrosion. Some areas may have higher air salt content, higher humidity, heavier rain and heavier 

snow.  We do not warrant against fading. We suggests customers use a UV protectant to extend the life of 

the product.

Loss or damage to Product: 

caused by shipping, abuse, misuse, improper/abnormal usage or 

unauthorized repairs are not covered by this warranty and may also void the warranty.

Unauthorized Replacement Parts:

 The warranty will become void if any defects or damages are 

associated with the use of unauthorized replacement parts. All replacement parts must be obtained from 

an authorized retailer.

Assembly Service: 

The warranty does not cover acts or omissions provided by a third-party assembly 

service. It is the customer’s responsibility to check all boxes and confirm all components are included and 

in their proper condition before installation occurs.

INSPECTION AND REPLACEMENT PARTS:

1.

2.

3.

NOTE:

 All requested information must be provided in order to review your warranty claim. 

To order replacement parts for your product please visit 

www.skywalkertrampolines.com

Skywalker Holdings, LLC, PO Box 574, Brigham City, UT 84302 USA.

  

Printed in China © 2019 Skywalker Holdings, LLC

Your product should be inspected upon unpacking and set up and thereafter on a regular basis. Worn, damaged 

or broken parts should be replaced immediately and before each use.  

Call the Skywalker Holdings Customer Service Department at 1-866-603-5867 to file a warranty claim. Be 

prepared to provide the following information: name, shipping address, a copy of your original sales receipt, a brief 

description of the problem and cause, product model number and serial number. We may also ask for photos of 

the damaged/defective parts.

Customer service will review your claim and contact you with further instruction.

Содержание SSBAC40




















Отзывы: