Skywalk POISON 2 L, Руководство пользователя

Страница: 19 / 32

51
it’s just a little. A repeated pinching or folding of the line at the same spot diminishes
its strength.
Every visual damage of a line, even if it is only the line coating, requires a replacement.
Only acquire new lines from the manufacturer or from an authorised skywalk-Service-
Centre. Your flying school or your dealer will assist you to change a defect line.
Check the correct length of the line before replacing it. Compare with its counterpart
on the opposite side of your glider. After the exchange a line-check will be necessary.
The best way to this is by unfolding the glider on the ground!
tips and tricks for cloth Handling:
aerofabríx[AI] 29 is metallized with mist-fine nano-coatings of aluminium, in order to
reflect UV rays, and therefore markedly slow down the aging properties of the cloth.
In order to care for and ensure the continued performance of your Glider and this
special high-performance cloth, it is imperative that you adhere to the following guidelines.
therefore, the following Instructions for Handling and care:
1. Avoid any unnecessary exposure to sun or weathering. During start, do not lay the
glider on the ground for long periods of time, and always pack it up right after landing.
2. Any rubbing or abrasion will lead to cloth damage, so be sure not to drag the cloth
on the ground.
3.
Lay the glider cell upon cell, but please avoid tightly squeezing or tightly folding the
glider together.
4. Always use the special inner Pack Sack together with the padded Pack Band, both
made of very soft cloth.
5. Always store the risers in the protective casing provided for this use.
6. Never bring the cloth into contact with saltwater, the metallic content may react
with the saltwater and lead to corrosion. If the glider does happen to come into
contact with saltwater, please rinse it with ample amounts of fresh water and
then carefully and thoroughly dry it.