![Skywalk Pepper Cross Light 110 Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/skywalk/pepper-cross-light-110/pepper-cross-light-110_manual-service_1292024004.webp)
> Before you land, assume an upright position, put your legs together, bend your knees
slightly and prepare to do a parachute landing fall.
> After landing in strong winds, pull the canopy toward you using the middle lines to keep
the reserve chute from inflating again.
TIP: POORLY MAINTAINED RESERVE CHUTES MAY OPEN MORE SLOWLY. IF THIS IS
THE CASE, PULL FIRMLY AND SHARPLY ON THE LINES!
ATTENTION
THE RESCUE SYSTEM MUST ALWAYS BE THROWN ON THE SIDE WHERE THE CON-
NECTING LINES OF THE HARNESS ARE LOCATED.
OPERATING LIMITS
> The PEPPER CROSS LIGHT has been specially developed for use as a reserve chute
for paragliding. Any use for other flying sports such as parachuting,
base-jumping etc. is prohibited.
> According to EN 12491, the reserve chute may only be used up to maximum speeds
of 32 m/s or 115 km/h..
> The reserve chute must be aired out and repacked every 6 months.
> After a deployment, the reserve chute must be inspected by the manufacturer or an
authorized maintenance shop for rescue equipment.
> The reserve chute must be replaced after 10 years, even if it has never been used.
PACKING MANUAL
All skywalk PEPPER CROSS LIGHT paraglider reserve chutes are inspected and packed in
skywalk‘s manufacturing facility. It is recommended that the reserve chute be repacked
once again by a suitably qualified and experienced specialist before installation in the har-
ness. The effectiveness of the reserve chute and its ability to save lifes depend on proper
packing. If in doubt, or if you have any questions, please contact your flight instructor or
skywalk dealer.
28
Releasing the Rescue System / Operating limits / Packing Manual
Step 1 & 2
Use a piece of line to thread the
packing loops together. Don’t for-
get the four corner loops mounted
slightly further back on the panels.
Secure the packing loops for now
and pull on the main riser and the
attached loops until it is tight.
Packing Manual
29
PREPARATION
> The reserve chute must be subjected to visual inspection and checked for damage to
the canopy, the lines and the main riser.
> Before repacking, the reserve chute must be aired out, ideally for 12 hours in a cool,
dry room.
> The packing area must be large enough, clean, level and dry.
EN