Skywalk EXIT, Руководство пользователя

Страница: 7 / 11

EXIT
EN
Mounting the front container:
The EXIT front container has 3 attachment points, so that it can be universally mounted
on standard harnesses. There are two methods to mount the front container to the
harness:
Method 1:
When using the supplied V-lines, make sure that the attachment loops are looped into
the left and right reserve chute attachment loops. Then hook the V-line loops into the
two main carabiners. This connects the V-lines and attaches the front container in a
single action.
Method 2:
When using the V-line integrated in the harness, separate the two attachment loops from
the EXIT V-Line. Afterwards the attachment loops are inserted into the main carabiners to
attach the front container on the top.
When using this method make sure that the speed bar connecting line is always routed
between the harness and the V-line.
For the third attachment point, guide the horizontal attachment loop around the leg
straps or the get-up system of the harness so that the front container cannot tip up-
wards in case of deployment.
All three attachment points offer the possibility to adjust the length of the attachment.
Make sure that the fasteners are neither loose in flight nor take up the main tension of
the harness.
We recommend that you open all adjusters to the maximum and then adjust the tension
in the harness simulator step by step so that the front container is fully seated on the
harness, but the main tension on the chest strap is still absorbed by the harness.
Installing the reserve chute 13 12 Installing the reserve chute