21
Owners’s Manual -
Model
C-OBX-4270-P
TV I
nsTallaTIon
& C
onneCTIons
|
4. Connect the red color connector to both your DVD/Blu-ray player and Composite’s red connector port
off the back of your TV.
5. Turn on the TV and your DVD/Blu-ray player.
6. Use the remote control’s input button or the input button on the right side of the TV to switch to AV
(CVBS).
Please Note :
1. Refer to the set-top box’s manual to make sure the set-top box is configured to output correctly to the TV.
2. This TV will turn off automatically if there’s no signal present for more than 15 minutes.
Connecting to an External Amplifier or
Amplified Speakers
Connecting with Digital Coax (Best Option)
1. Make sure the power of the TV and your receiver is turned off.
2. Obtain a Coaxial SPDIF cable, connect it to your receiver’s Coaxial
SPDIF digital input and the Digital Audio Out port on the back of the TV.
3. Turn on the TV and your receiver.
Please Note :
1. If you want pure digital stream for your receiver to decode, you must also configure
the TV’s OSD Sound->Digital Audio Out function. Make sure the option is on Bit
Stream.
2. If your receiver is making static noises when receiving Bit Stream, you must use
the PCM option instead.
3. Refer to the receiver’s manual to make sure the receiver is configured to receive
signals correctly from the TV.
Located on Back of TV
