skyvoe OBX 47, Инструкция по сборке

Страница: 21 / 23

19
P
ost
t
ilt
M
ount
oBX 4770 / 5570
|
The following instructions apply to OBX 47” & 49” Television
Secure Screws should be close to the
marked locations
Remove and set aside the 4 bolts and washers
from each of the clamp nuts with springs.
With the bolts and washers removed
place the clamping nuts with spring
inside the power strut , one toward the top and
one toward the bottom of each power strut.
Spring should be touching both sides of the
power strut as shown.
Align holes of the mounting arms with the
holes of the clamp nut springs as shown
below. The arms should be level with each
other.
You may adjust the position of the
clamp nuts with springs up or down as
needed.