The meter is a portable, 3 ½ digits LCD clamp meter with insulation
test function (with optional 500V insulation tester unit) designed for
being used by electricians, technicians, serviceman and hobbyists
who need an instrument that is accurate, reliable, and always ready
for use. It is powered by a standard 9V battery, and can provide
150-200 operating hours, which depends on the type of battery and
using conditions. It has rugged structure design, good feeling held
in operator’s hand and convenient use.
OPERATING FEATURES
AC Current
200A - 1000A
20M
Ω
- 2000M
Ω
Insulation Test
( With optional 500V insulation tester unit )
AC Volage
750V
DC Volage
1000V
Resistance
200
Ω
- 20k
Ω
Continuity Test
<50
Ω
with audio tone
The display of the meter is liquid crystal assembly providing reliable
and readable display in all light conditions. The decimal point is
automatically positioned, and the polarity sign (minus) is lighted for
negative DC measurement (that no sign appears is defaulted as
positive) so that the display can be read directly while making
measurement. Over-range measurement is indicated by figure "1"
only. In addition, the display includes low battery indication. If low
battery sign is indicated, the operator should replace the exhausted
battery with a new one.
SPECIFICATIONS
The following specifications assume a l-year calibration cycle and
operating conditions of temperature scale of 18ºC to 28ºC (64ºF to
82ºF) with relative humidity up to 80% unless otherwise noted.
