Congratulations to the purchase of this microphone.
Please read this manual carefully prior to using the unit.
WARNING:
-
Read the manual prior to using the unit.
-
Keep the manual for further reference.
-
Keep the original packaging to ensure safe transport of the unit.
-
For indoor use only.
-
Set the volume of the microphone to a level that doesn’t cause feedback in order to prevent
damages to the audio equipment.
-
Keep away from high temperatures, humidity and strong vibrations.
-
Also read the manual of the unit to which the microphone will be connected prior to operating
it.
CONNECTION OF THE MICROPHONE:
-
Plug the XLR plug into the microphone (3) until it clicks into position. (Make sure that the
microphone is switched OFF when you plug or unplug the lead).
-
Push the small switch on the XLR plug to unplug it from the microphone.
-
The microphone is fitted with a 5/8” internal thread (2) which fits on every standard
microphone stand.
1 = Ground (earth) 2= 3= Signal – (fig. 1)
OPERATION:
-
The microphone is switched ON and OFF via the switch (1).
-
Set the microphone to the OFF position prior to connecting or disconnecting it from a mixer or
any other audio equipment.
-
Speak into the microphone at a distance of 2 to 5cm. Reduce or increase this distance
accordingly in order to get a regular, natural sound
-
Place the microphone in a way that it doesn’t cause feedback. It is recommended to position
the microphone at the same level or behind the speakers (fig. 2)
-
Do not drop the microphone.
-
Keep the microphone dry. Avoid extreme temperatures and humidity.
CARE:
Clean the case of the microphone with a tooth brush or a soft, dry cloth. Do not use aggressive
cleaners or solvents. If the case and /or the wind cap are very dirty, you can clean them with water.
Remove the 5 screws on the front side and take out the wind cap. Clean it with water and wait until it
has dried completely prior to inserting it.
WARNING!! WATER WILL DAMAGE THE MICROPHONE ELEMENT. THEREFORE THE GRILLE
AND THE CAP MUST BE COMPLETELY DRY BEFORE YOU PUT THEM BACK IN PLACE.
SPECIFICATIONS
Type:.......................................................... dynamic
Pattern: ....................................................... cardioid
Frequency range: ........................... 60 – 16.000 Hz
Impedance: ............................................. 250 Ohms
Sensitivity:..................................................... -76 dB
Dimensions (hxwxd): ................... 179 x 56 x 71mm
Weight:............................................................690 g
Microphone connector: ............................3-pin XLR
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual.
SkyTronic UK cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and
warnings. This is also applicable to all damages in whatever form.
Содержание 173.498
Страница 2: ...Fig 1 Fig 2...
